Ingenieria Grupo Empresarial Actual S.A. De C.V.

Drain-Titan
Double Suction,
Urethane Lined Sump

D800 Series Cast Iron

MEN and MEN-SP
End-Suction

Standards
• Flowserve
Operating Parameters
• Flows to 160 m3/h (700 gpm)
• Heads to 40 m (130 ft)
• Pressures to 4 bar (55 psi)
• Sizes from 40 mm (1.5 in) to
100 mm (4 in)
• Solids to 15 mm (0.5 in)
Features
• Double suction, urethane coated
wet-end
• Robust, integral unit construction
• Large diameter, stiff cantilever
drive shaft
• No submerged bearings or seals
• Double sided impeller with
pre-set clearance
• Keyed and bored shaft coupling
• Standard single lip oil seal
• Urethane lined, slotted outlet
pipe flange
• Grease lubricated, single row,
deep groove ball bearings
• No priming required
• Run-dry capability
See Bulletin PS-10-7

Standards
• Flowserve
Operating Parameters
• Flows to 340 m3/h (1500 gpm)
• Heads to 120 m (395 ft)
• Pressures to 15 bar (220 psi)
• Temperatures to 120°C (250°F)
Features
• High efficiency closed impeller
• Centerline discharge
• Sealed-for-life pre-lubricated motor
bearings with two-year minimum life
• Renewable wear rings and shaft
sleeves
• Pre-set mechanical seal assembly
• Bell type mechanical seal cover
• Standard NEMA C-face motor
• Back pull-out design
• Threaded and flanged connections
• Configuration options
– Type D-814 - Frame mounted
– Type D-824 - Close-coupled
– Type D-834 - Vertical in-line
See Bulletin PS-10-6

Standards
• DIN 24255
• EN 733
• Flowserve
Operating Parameters
• Flows to 700 m3/h (3080 gpm)
• Heads to 100 m (330 ft)
• Pressures to 16 bar (230 psi)
• Temperatures to 120°C (250°F)
Features
• Modular design concept
• 33 sizes available
• Top discharge casing
• Fully machined, high efficiency,
shrouded impeller
• Impeller balance holes for
reduced thrust
• Open seal chamber with integral
vortex breaking ribs
• Stainless steel shaft
• Oversized bearings
• Standard case wear rings
• Back pull-out design
Other Configurations
• MHP high-pressure water pump
• MENBLOC close coupled water pump
• ME high capacity, vertical water pump
• MEV high capacity, vertical
water pump
See Bulletin PS-10-2