Ingenieria Grupo Empresarial Actual S.A. De C.V.

F-Line End-Suction,
Multistage

SMP Standard Motor

VSMP Vertical,
Standard Motor

Standards
• Flowserve
Operating Parameters
• Flows to 500 m3/h (2200 gpm)
• Heads to 250 m (820 ft)
• Discharge pressures to 25 bar
(365 psi)
• Temperatures to 105°C (220°F)
Features
• Modular design
– 8 sizes
– 15 hydraulics
– 2 impeller types
• To 9 stages, depending on model
and operating speed
• Sleeved shaft under sealing system
• Cast iron EN-GJL 250 pressure
casings
• Cast iron EN-GJL 250 or NORYL®
impellers and diffusers, depending
upon model
• Steel grade C 35 E shaft
• 13% chromium steel sleeve
Configurations
• FP horizontal, overhung impeller
• FM horizontal, close coupled
• FD and FS verticals
• FAD and FMD vertical, close coupled

Standards
• Flowserve
Operating Parameters
• Flows to 135 m3/h (600 gpm)
• Heads to 70 m (220 ft)
• Pressures to 12 bar (175 psi)
• Temperatures from -40°C (-40°F) to
120°C (250°F)
Features
• Glass reinforced polymer, high
efficiency, semi-open or closed
impellers standard
• Industry standard NEMA motors
• Stainless steel, self-aligned
mechanical seal
• Back pull-out design
• Clamp-type mounting plate
• Options
– Cast iron, bronze or 316 SS
impellers
– Stub shaft design
Other Configurations
• SMX non-metallic standard motor
pump
• VSMP vertical standard motor pump
See Bulletin PS-10-26

Standards
• Flowserve
Operating Parameters
• Flows to 135 m3/h (600 gpm)
• Heads to 70 m (220 ft)
• Pressures to 12 bar (175 psi)
• Temperatures from -40°C (-40°F)
to 120°C (250°F)
Features
• Glass reinforced polymer, high
efficiency, semi-open or closed
impellers standard
• Industry standard NEMA motors
• Stainless steel, self-aligned
mechanical seal
• Back pull-out design
• Clamp-type mounting plate
• Options
– Cast iron, bronze or 316 SS
impellers
– Stub shaft design
Other Configurations
• SMP standard motor pump
• SMX non-metallic standard
motor pump
See Bulletin PS-10-26