Ingenieria Grupo Empresarial Actual S.A. De C.V.

SMX Non-Metallic
Standard Motor

ECPJ (VS4 and VS5)
Sump

ESP2 Vertical Immersion
Sump

Standards
• Flowserve
Operating Parameters
• Flows to 25 m3/h (100 gpm)
• Heads to 20 m (60 ft)
• Pressures to 12 bar (175 psi)
• Temperatures to 80°C (180°F)
Features
• Polyphenylene sulfide (PPS) casing,
adapter and impeller
• Standard NEMA 56J frame C-faced
motor
• Stainless steel, self-aligned
mechanical seal
• Back pull-out design
• 40 mm (1.5 in) port size for hose
connection
Other Configurations
• SMP standard motor pump
• VSMP vertical standard motor pump
See Bulletin PS-10-26

Standards
• API 610 (VS4 and VS5), latest edition
Operating Parameters
• Flows to 500 m3/h (2200 gpm)
• Heads to 150 m (500 ft)
• Pressures to 16 bar (230 psi)
• Temperatures to 350°C (660°F)
• 42 sizes available
Features
• Lineshaft (VS4) and cantilever (VS5)
configurations available
• Four impeller designs to suit
hydraulic requirements
– Closed multivane impeller with
front wear rings and back vanes
– Closed multivane impeller with
front and rear wear rings
– Open multivane impeller with
back vanes
– Free flow impeller with back vanes
• Multiple shaft sealing options
– V-ring
– Throttle bushing
– Lip seal with grease-filled
stuffing box
– Soft packing
• API 682 seal chamber accommodates
multiple seal types
• Column lengths to 6 m (22 ft)
– Suction pipe available
• Choice of API materials
• NACE MR0175 materials available
• Internal or external bearing flushing
• Bearing cooling
• Suction strainer
See Bulletin PS-10-10

Standards
• Flowserve
Operating Parameters
• Flows to 800 m3/h (3500 gpm)
• Heads to 90 m (300 ft)
• Pressures to 12 bar (175 psi)
• Temperatures to 180°C (350°F)
Features
• Optimized lineshaft bearing design
to API 610 spacing requirements
• Double row external thrust bearings
• Single and duplex configurations
• Flanged discharge
• Large basket strainer
• Industry standard TCV motors
• Lubrication options
– Product lube design
for clear liquids
– Dual particle separator
for light solids
– Grease lubrication
• Mounting plate sealing options
– Vapor tight
– Vapor proof
– Pressurized design
• Options
– Upper stuffing box
– Sealing ring
– Suction tailpipes
– Level controls
See Bulletin PS-10-24