Ingenieria Grupo Empresarial Actual S.A. De C.V.

RJ and RJC Rubber Lined
Slurry Sump

Titan Slurry Heavy-Duty,
Radially Split, Lined

Terra-Titan
Vertical Cantilever Sump

Standards
• Flowserve
Operating Parameters
• Flows to 225 m3/h (1000 gpm)
• Heads to 30 m (100 ft)
• Pressures to 10 bar (150 psi)
• Temperatures to 110°C (225°F),
depending on material
• Solids from 2% to 70% by weight
• Speeds to 1780 rpm
Features
• RJ - Submerged bearing and lineshaft
design for deep setting
• RJC - Cantilever design with no
submerged bearings
• Radically split casing with antiprerotation
vanes in suction nozzle
• Casing liners pressure molded on
steel backing plates
– Multiple materials available
• Pressure molded closed impeller with
pump-out vanes on front and rear
shrouds
• RJ has fluted “Cutlass” rubber
bearings
• RJC has “Thordon” restriction
bushing
• Directly coupled or V-belt driven
• Options
– Hard metal expeller
– Choice of liner materials
Other Configurations
• R horizontally split rubber
lined slurry
See Bulletin PS-10-18

Standards
• Flowserve
Operating Parameters
• Flows to 3600 m3/h (16 000 gpm)
• Heads to 90 m (300 ft)
• Sizes from 50 mm (2 in)
to 350 mm (14 in)
Features
• Fully interchangeable elastomeric
or hard metal liners
• Radially split casing
• High efficiency, closed impeller
• Ample seal chamber accommodates
a variety of packing and seal types
• Heavy-duty bearing frame sized
to handle belt loads
• Bearing cartridge with back-to-back
angular contact thrust bearings
• Roller type radial bearings
• Contact lip seals
• Dimensionally compatible with the
industry’s most widely used pumps
• Optional expeller for dynamic sealing
See Bulletin PS-10-8

Standards
• Flowserve
Operating Parameters
• Flows to 250 m3/h (1100 gpm)
• Heads to 45 m (150 ft)
• Pressures to 5 bar (70 psi)
• Temperatures to 100°C (212°F)
• Sizes from 40 mm (1.5 in)
to 125 mm (5.0 in)
• Sump depths from 700 mm
(28 in) to 1800 mm (72 in)
Features
• One-piece suspended, oversized
cantilever shaft construction
• Interchangeable urethane or hard
metal wetted parts
• Concentric casing design
• Double suction, hydraulically
balanced open impeller
• External impeller adjustment
• Renewable Terraprene urethane
shaft sleeve
• Greased for life, heavy-duty,
self-aligning roller bearings
• Upper and lower strainers
• Run-dry capability
• ANSI and ISO configurations
• Portable
• Lifting lugs
• Rigid motor mount pivot bar
• Available bottom suction tailpipe
• Multiple drive options
See Bulletin PS-10-7