Ingenieria Grupo Empresarial Actual S.A. De C.V.

LC Chemical Slurry

MND Hard Metal
Absorber Recirculation

MNR Rubber Lined
Absorber Recirculation

Standards
• Flowserve
Operating Parameters
• Flows to 8000 m3/h (35 200 gpm)
• Heads to 100 m (325 ft)
• Pressures to 25 bar (365 psi)
• Temperatures to 140°C (285°F)
• Specific gravities to 1.7
Features
• Concentric casing with tangential
discharge
• Rigid, one-piece bearing frame
with two angular contact outboard
bearings and roller inboard bearings
• Large diameter, heavy-duty shaft
• Choice of shaft sealing options
– Wet gland packing
– Single or double mechanical seal
– High pressure double
mechanical seal
– Special high solids seals
– Alumina industry seal
• Choice of materials of construction
• Multiple impeller designs
• Direct coupled or belt driven
• Choice of six drive arrangements
• Options
– Inducer
– Stuffing box cooling system
Other Configurations
• PL-C cantilever chemical
slurry sump
• LC-S lineshaft chemical
slurry sump
See Bulletin PS-10-11

Standards
• Flowserve
Operating Parameters
• Flows to 17 500 m3/h (77 000 gpm)
• Heads to 40 m (130 ft)
• Sizes from 600 mm (24 in) to
1000 mm (40 in)
Features
• One-piece, high efficiency impeller
with mixed flow vane design
• Multiple materials of construction
• Replaceable casing wear ring
• Opposed tapered roller bearings
designed for a minimum B10 life
of 100 000 hours
• Product flush slurry seal
• External end clearance adjustment
• Front and back pullout
Other Configurations
• Vertical configuration
• MNR rubber lined absorber
recirculation
See Bulletin PS-10-32

Standards
• Flowserve
Operating Parameters
• Flows to 17 500 m3/h (77 000 gpm)
• Heads to 40 m (130 ft)
• Sizes from 600 mm (24 in) to
1000 mm (40 in)
Features
• One-piece, high efficiency impeller
with mixed flow vane design
• Removable one-piece elastomeric
casing liner
• Radially split casing
• Multiple materials of construction
• Replaceable casing wear ring
• Opposed tapered roller bearings
designed for a minimum B10 life
of 100 000 hours
• Product flush slurry seal
• External end clearance adjustment
• Front and back pullout
Other Configurations
• Vertical configuration
• MND hard metal absorber
recirculation
See Bulletin PS-10-32