Ingenieria Grupo Empresarial Actual S.A. De C.V.

Drain-Titan
Double Suction,
Urethane Lined Sump

VSMP Standard Motor

ECPJ (VS4 and VS5)
Sump

Standards
• Flowserve
Operating Parameters
• Flows to 160 m3/h (700 gpm)
• Heads to 40 m (130 ft)
• Pressures to 4 bar (55 psi)
• Sizes from 40 mm (1.5 in)
to 100 mm (4 in)
• Solids to 15 mm (0.5 in)
Features
• Double suction, urethane coated
wet-end
• Robust, integral unit construction
• Large diameter, stiff cantilever
drive shaft
• No submerged bearings or seals
• Double sided impeller with
pre-set clearance
• Keyed and bored shaft coupling
• Standard single lip oil seal
• Urethane lined, slotted outlet
pipe flange
• Grease lubricated, single row,
deep groove ball bearings
• No priming required
• Run-dry capability
See Bulletin PS-10-7

Standards
• Flowserve
Operating Parameters
• Flows to 135 m3/h (600 gpm)
• Heads to 70 m (220 ft)
• Pressures to 12 bar (175 psi)
• Temperatures from -40°C (-40°F)
to 120°C (250°F)
Features
• Glass reinforced polymer, high
efficiency, semi-open or closed
impellers standard
• Industry standard NEMA motors
• Stainless steel, self-aligned
mechanical seal
• Back pull-out design
• Clamp-type mounting plate
• Options
– Cast iron, bronze or 316 SS
impellers
– Stub shaft design
Other Configurations
• SMP standard motor pump
• SMX non-metallic standard
motor pump
See Bulletin PS-10-26

Standards
• API 610 (VS4 and VS5), latest edition
Operating Parameters
• Flows to 500 m3/h (2200 gpm)
• Heads to 150 m (500 ft)
• Pressures to 16 bar (230 psi)
• Temperatures to 350°C (660°F)
• 42 sizes available
Features
• Lineshaft (VS4) and cantilever (VS5)
configurations available
• Four impeller designs to suit
hydraulic requirements
– Closed multivane impeller with
front wear rings and back vanes
– Closed multivane impeller with
front and rear wear rings
– Open multivane impeller with
back vanes
– Free flow impeller with back vanes
• Multiple shaft sealing options
– V-ring
– Throttle bushing
– Lip seal with grease-filled
stuffing box
– Soft packing
• API 682 seal chamber accommodates
multiple seal types
• Column lengths to 6 m (22 ft)
– Suction pipe available
• Choice of API materials
• NACE MR0175 materials available
• Internal or external bearing flushing
• Bearing cooling
• Suction strainer
See Bulletin PS-10-10